Thursday, November 15, 2012

Monday, September 17, 2012

STC Ratings Simply Put

Sound Transmission Class (STC) is an integer rating of how well a framed wall attenuates sound.

• Doubling the mass of a wall assembly does not double the STC

• An empty framed wall (steel studs and a layer of gypsum wallboard on each side) has an STC of approximately 35dB

• Adding an additional layer of gypsum wallboard (from two sheets to four sheets) increases the STC by about 5–6 points

• Adding cavity insulation increases the STC approximately 4–6 dB

• Fiberglass batts increase the STC to 39; Cellulose insulation increases the STC to 44

• Batt insulation must fit tight without gaps

• Batt thickness provides better sound control than batt density. Compressing a batt reduces STC and thermal efficiency

• Stud assembly must span from deck to ceiling

• Structurally decoupling the gypsum wallboard panels from each other, like using a staggered stud assembly

or a double stud wall) can yield an STC as high as 63 or more

•Also materials such as United Plastics Corporation's dB-3PRO along with gypsum wallboard and insullation may also improve STC ratings (Refer to manufacturer specifications)

Wednesday, September 5, 2012

How Loud is TOO LOUD

Standards set by OSHA (Occupational Safety and Health Administration) indicate that continued exposure to noise over 85 dBA will eventually harm hearing. According to OSHA, the exposure time allowed is cut in half for every 5 decibel increase. For example, if a sound is 95 dBA, then 4 hours of exposure, over time, will cause hearing loss, and exposure to sounds at 115 dBA for just 15 minutes a day, over time, will cause hearing loss. Other groups, such as NIOSH (National Institute for Occupational Safety and Health) calculate safe exposure time by decreasing time in half for every 3 decibel increase. The NHCA (National Hearing Conservation Association) is an excellent resource for more information about occupational hearing conservation programs.

Tuesday, June 19, 2012

Will this really control sound?

Resilient channel is a specially-formed, metal device that, when used to hang drywall (instead of attaching the drywall directly to the wall studs or ceiling joists), significantly reduces the sound transmission of the wall or ceiling system. The channel material is secured to the studs and drywall is secured to the channel - providing a break in sound transmission through the wall.

Resilient channel for sound control is not effective if attached to sheet materials, such as drywall. It is also important to use the right length screws, so they do not penetrate into the wood framing.

Just a few screws into the wood can undermine the resilient connection and substantially lower the STC and IIC ratings.

Monday, June 4, 2012

Did you know?

Resilient Channel was not originally designed to provide improved sound attenuation, but rather to avoid cracks in drywall? 

Tuesday, May 22, 2012

More and more States are adopting ordinances for dealing with sound

Here is an example of what one state is doing:


Table 1 - State noise guidelines.

State Department of Health and County Liquor Commission Maximum Permissible Noise Limits
Zoning Districts:
Daytime
(7:00 am to 10:00 pm)
Nighttime
(10:00 pm to 7:00 am)
Residential, Conservation, Preservation, Public/Open Space
55 dBA
45 dBA
Multi-Family Dwellings, Apartments, Business, Commercial, Hotel, Resort
60 dBA
50 dBA
Agriculture, Country, Industrial
70 dBA
70 dBA
County Land Use Commission Special Ordinance for Outdoor Amphitheater
Nearest Apartment/Hotel/Business (approximately 2000 feet away)
68 dBA
Prohibited

Tuesday, April 17, 2012

How does NOISE effect us in everyday life?

When unwanted sound created by human beings hits our ears and disturbs the environment, noise pollution is created. Chiefly, noise pollution comes from barking dogs, loud music, vehicles, aircraft and rail transport, air-conditioners, factories, amplified music and construction work.
Sources of noise: All transportation systems create noise pollution. With residences created adjacent to factories, they experience noise pollution and its adverse effects. Besides transportation noise, noise can come from factory appliances, power tools and audio entertainment systems.
Measures of noise: Noise pollution is measured in decibels. When noise is at 45 decibels, no human being can sleep, and at 120 decibels the ear is in pain and hearing begins to be damaged at 85 decibels.
Effects of noise pollution
Human health: Noise pollution disturbs our health and behavior in a number of ways including deafness causing lack of sleep, irritability, indigestion, heartburn, high blood pressure, ulcers, and heart disease. Just one noise explosion from a passing truck drastically alters our endocrinal, neurological, and cardiovascular functions in many individuals. If this is prolonged or frequent, the physiological disturbances become chronic and contribute to mental illness.
Annoyance: Sometimes, even low levels of noise are irritating and can be frustrating, and high volumes can be annoying. Natural sounds are less irritating than those we find uncontrollable but intermittent sounds such as a tap dripping water can be more irritating than the sound of falling rain.